Die Cut + Edge Strip
Roll Die Cutting Machine with Edge Stripping
Built on the flatbed roll die cutting platform with a dedicated stripping unit for four-side waste removal on cup fans, paper plates, and carton work. Delivers die-cutting, creasing, embossing, and edge stripping in one roll-to-sheet line for post-print packaging converters.
Image coming soonDie Cut & Edge StripRecommended 1600 × 1200
Stripping Module
Dedicated Edge-Strip Unit on Flatbed Platform
Roll-to-sheet with waste take-off
After die-cutting and creasing, the stripping section removes perimeter scrap from cup fans, plate blanks, and carton panels—reducing manual pick-out on high-volume cup and food-service lines.
- Stripping areas to 1250×510 mm (customizable to product size)
- Compatible with 100–600 GSM PE-coated board and kraft
- Shaftless unwind option to 1600 mm roll diameter
Image coming soonEdge stripping sectionRecommended 1200 × 900
When to Choose This Platform
Edge Stripping vs. Standard Flatbed Die Cut
| Capability | Standard flatbed die cut | With edge stripping |
|---|---|---|
| Primary output | Die-cut / creased sheets | Die-cut sheets with perimeter scrap removed |
| Typical speed | Up to 260 strokes/min (950 class) | 100–180 strokes/min |
| Best for | General carton & board blanks | Cup fans, plates, stripped carton work |
| Strip zone | — | 900×450 to 1250×510 mm |
Specifications
Technical Data by Width Class
| Web width classes | 950 / 1200 / 1300 mm |
|---|---|
| Die-cutting speed | 100–180 strokes/min |
| Maximum cutting area | 950×540 mm (opt. 950×640) · 1200×640 · 1300×750 mm |
| Stripping area | 900×450 · 1110×450 · 1250×510 mm (customizable) |
| Cutting accuracy | ±0.20 mm |
| Max unwind diameter | 1500 mm (shaftless option 1600 mm) |
| Suitable materials | 100–600 GSM PE-coated paper, white board, kraft |